WIELANDER+SCHILL VAS 821 003, Руководство по эксплуатации

Страница: 5 / 32

Operation Manual MIG-MAG Alu welding - brazing / VAS 821 003
©
Wieländer + Schill
Page 5
2.3 Connecting to the electric network
Check if the voltage stated on the device label matches the rated
voltage of your electric network.
The device can be connected to an electric socket equipped with protective contact which
has been installed by an authorized electrician. The current circuit of the socket must be
protected with 16Amp melting safety fuse or circuit breaker.
The device is delivered without plug. Please ensure that only plugs and/or sockets are used
that comply with the CEE standard.
2.4 Connecting the MIG/MAG torch
- The torch connection supplied is a EURO Standard torch
connector.
- Please, tighten the connector well to avoid any contact
resistance. A loose connection can cause damage to the
machine and torch.
- Never use damaged torch.
Connect the welding conduction main connecting plug into the main socket on the front side.
Secure it with the lock nut.
Work piece
clamp (earth)
Torch A
Torch B
Torch B
state LED
Torch A
State LED