WIELANDER+SCHILL VAS 821 003, Руководство по эксплуатации

Страница: 10 / 32

MIG-MAG Alu welding - brazing / VAS 821 003 _Operation Manual
Page 10 ©
Wieländer + Schill
ISO 4850
CYLINDERS CAN EXPLODE
Gas cylinders contain gas under high pressure which can explode
if damaged or exposed to a heat.
Regional safety regulations for pressurised gas must be followed.
Due to high pressure inside the bottles (up to 200 bar) it is
necessary to secure them against mechanical damage, overturning,
downfall, heating up (max 50°C), against sunshine exposure for
a longer time and against strong frost.
WARNING RISK OF ELECTRIC SHOCK
Voltages can cause potentially fatal electric shocks and burns on
contact. Even low voltages can cause a shock and lead to
accidents.
Install and ground this equipment according to the instruction
manual and in accordance with national and local standards.
Wear the full personal protective equipment (depending on the
application)!
Never touch live components such as welding current sockets or
stick, tungsten or wire electrodes!
Always place torches and electrode holders on an insulated surface!
The device must be placed out of higher electrical danger
environment. You can be in the endangered environment with a
torch only.
CAUTION ELECTROMAGNETIC FIELDS
Device is constructed according IEC 60974-10 class A and is
intended to work only in industrial areas.
When operating welding machines, electro-magnetic interference
can occur.
The user is responsible for any interference caused by welding.
Pacemaker and hearing aid operation can be affected by magnetic
fields from high currents. Pacemaker and hearing aid wearers
should consult a doctor before going near any arc welding
machines.
Welding in the environment with higher electrical danger
The welding device is constructed in compliance with IEC 60974 as
a device suitable for welding in the environment with higher
electrical danger.