InvertaPuls IP4-3
Operation Manual
Page 4
1 INTRODUCTION
1.1 Product Introduction
InvertaPuls IP4-3 welding machine is compact pulse MIG-MAG welding inverter especially
developed for car body repair. The unique benefit is triple wire feed unit which together with
its excellent welding properties for thin sheet metal as well as aluminum and CuSi makes it
possible
to use this device to repair all kinds of vehicles with fine quality results.
Be aware of danger resulted from welding and follow the safety and fire instructions.
It`s necessary to keep the device on a dry place, to protect device against moisture. It`s not
advisable to use the device on the open air during rain.
2 SETUP
2.1 Setup conditions
It´s necessary to set the device for welding in protection atmosphere on a dry place with the
sufficient area for cooling. The device is designed for use in covered area (under roof).
2.2 Selecting the accessories
Please check the machine for possible
transport damages before use!
1. screw M5x16
4St
2. screw M8x16
4 St
3. spring washer M8
4 St
4. U-disc M8
4 St
5. screw M10x40
2 St
6. spring washer M10
2 St
7. U-disc M10
2 St
8. U-disc M24
2 St
9. split pin 3.5x40
2 St
10. 2x20l place for gasbottle 1 St
11. front wheel set
1 St
12. rear wheels
2 St
13. rear axle
1 St
14. gas connecting hose
3 St
15. belt for gas bottle
4 St
16. MIG torch,
Steel Version
1 St
17. MIG torch,
CuSi/Alu Version
1 St
18. ground cable
1 St