InvertaPuls IP4-3
Operation Manual
Page 18
4.3 Set up, adjustment and display description
4.3.1
Welding power set up
Teh welding-brazing machines are controlled with full
synergic feature (except Manual modus).
The welding power is to adjust just with one main rotary
encoder. By press of the encoder button, wire speed (in
meters/min) or material thickness (in millimeters) can be
selected.
In MMA and TIG mode is only Ampere setup possible.
4.3.2
Arc length correction synergic mode
In all MIG/MAG modes is possible to adjust length of
the welding arc. By turning the encoder in any direction
is display switching from Voltage mode to Arc length
correction mode (% LED active).
Arc length set to = 0 –
Arc length set to max. +
Arc length set to min. –
The settings made for the respective operating mode and
the additional material remain valid even after switching off
and on again!