Wieland wienet WR-LTE v3 SL, Руководство пользователя

Страница: 19 / 36

5 | Router Design
Wieland Electric GmbH | BA001035 (Rev. A) | 08/2016
19
5.8.4 SIM card reader
Two SIM card readers for 3 V and 1.8 V SIM cards are placed on the rear panel of the router. For getting
the router to work it is necessary to insert an activated SIM card with an unblocked PIN code.
The SIM cards might be of different adjusted APN (Access Point Name).
Changing the SIM card:
•
Before handling of the SIM card disconnect the router from power supply!
•
Use a plastic opening tool, or your fingernail, to press the SIM card slightly deeper into its slot until you
hear a click.
•
After the click, release the card and it will pop out of its slot.
•
Remove the SIM card and push any other SIM card into the slot until it clicks in place.
5.8.5 MicroSD card reader
The microSD card reader is placed on the rear panel of the router (the third slot). This card reader allows
the router to operate with microSD memory cards. Technical specifications are stated in the table below:
Technical specifications of microSD card
Supported technologies SDHC, SDXC
Supported capacity SDHC
SDXC
up to 32 GB
from 32 GB to 64 GB
Changing the microSD card:
•
Use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot
until you hear a click.
•
After the click, release the card and it will pop out of its slot.
•
Remove the microSD card and push any other microSD card into the slot until it clicks in place.
SD card