Wieland wienet WR-LTE v3 SL, Руководство пользователя

Страница: 17 / 36

5 | Router Design
Wieland Electric GmbH | BA001035 (Rev. A) | 08/2016
17
5.8.1 Status indication
Router status is shown by nine LED indicators on the front panel. Each ETH port has two additional
LEDs that provide information about theport status
.
Caption Color State Description
PWR Green Blinking
On
Fast blinking
Router is ready
Starting of the router
Updating firmware
USR Yellow — Function of this LED diode can be selected by user
POE Yellow
Green
— —
SIM Yellow
Green
On (Yellow color)
On (Green color)
The first SIM card is active
The second SIM card is active
WAN Yellow 1x flash per sec.
2x flash per sec.
3x flash per sec.
Signal strength is from –50 dBm to –69 dBm
Signal strength is from –70 dBm to –89 dBm or difference
between neighbours cells is exactly 3 dBm
Signal strength is from –90 dBm to –113 dBm or differ-
ence between neighbours cells is smaller than 3 dBm
DAT Red Blinking Communication in progress on radio channel
IN0 Green On Binary input no. 0 is active
IN1 Green On Binary input no. 1 is active
OUT Yellow On Binary output is active
ETH0
ETH1
ETH2
Green On
Off
Selected 100 Mbit/s
Selected 10 Mbit/s
ETH0
ETH1
ETH2
Yellow On
Blinking
Off
The network cable is connected
Data transmission
The network cable is not connected
Attention!
State indication of WAN LED is updated every 10 seconds.
ATTENTION