Flex Cut RMR 230 H
2 To this document
8
846 99 01 - 003
05 | 2021
2.
To this document
2.1
Validity
This document applies to machines of the type:
Flex Cut RMR 230 H
All information, figures and technical specifications were the latest available at the time this document was published.
Design specifications are subject to change at any time without prior notification.
2.2
Reorder
Should this document have become wholly or partly unusable, you can use the document number on the cover sheet to
request a replacement.
The document can also be downloaded via the Wiedenmann homepage.
2.3
Applicable documents
Alongside the machine operating instructions, the following documents are also supplied and should also be observed:
•
Operating manual tractor
•
Operating instructions PTO shaft
2.4
Target group of the document
This document is aimed at machine operators that fulfil the minimum personnel qualification requirements,
see Section 3.6.1
Personnel qualification of the operating personnel
2.5
How to use this document
2.5.1
Directories and references
Table of contents / Headers and footers
The table of contents, as well as the headers and footers in this document provide fast orientation in the sections.
Cross-references
The text contains cross references to other documents or page references to a different section in the same document.
2.5.2
Directions
The designations “right” and “left” are applicable to the trailed device moving in forward direction.
2.5.3
Term machine
The term "machine" is also used to refer to the "Lawn mower" in the remainder of this document.
