Flex Cut RMR 230 H
13 Special equipment
52
846 99 01 - 003
05 | 2021
13.1.2
Install the mulching device
➢
Screw on each outer baffle plate (
1
) manually with an
M8 x 20 mushroom head screw (
2
).
CAUTION!
Touching the drive parts by protruding
thread
➢
The use of longer screws is
prohibited.
➢
Tighten each baffle plate from above with three
hexagon screws (
1
), washers and a lock washer.
➢
Screw each deflector bracket (
1
) in place with two
M10 x 25
screws (
2
), two washers each and one lock washer
each.
➢
Tighten all screw fittings firmly.
➢
In the area of the ejection channel, fasten the rear
baffle plates (
1
) with a mushroom head screw (
2
)
and two hexagon screws (
3
).
➢
Tighten all screw fittings firmly.
➢
Install the blades supplied with the composting unit as
in
Section
Steep-lifting for exchanging blades
.
