widos MAXIPLAST Скачать руководство пользователя страница 13

Страница: 13 / 57

Safety rules

Chapter 2

16.05.17

Working Instructions WIDOS MAXIPLAST

Page 13 of 41

2.10.3

Danger by cutting / squeezing / catching

•

Always put the planer back into its box before and after usage.

•

Only transport the planer at the holder and do not touch surfaces.

•

Do not grip between clamped pipe endings.

•

Make sure that your clothing is not seized into the planer.

2.11.

Warranty and liability

Fundamentally our "general sales and delivery conditions" are in force.
The buyer received them before making the contract.

Guarantee and liability demands referring to damages of persons or things are excluded if they are
caused by one or several of the following reasons:

•

Not using the machine according to the prescription.

•

Unprofessional transport, building-up, starting , operating and maintenance of the machine.

•

Running the machine with defective or not properly mounted safety equipment.

•

Ignoring the information given in this manual.

•

Structural changes on the machine without permission.

•

Unsatisfactory checkings of parts of the machine, which are worn out.

•

Unprofessionally performed repairs.

•

In case of catastrophes and acts of God.

Содержание MAXIPLAST


























































Результаты поиска

Содержание MAXIPLAST

Отзывы:

Бренды по названию

Популярные бренды

widos MAXIPLAST, Перевод инструкций по эксплуатации

Результаты поиска

Содержание MAXIPLAST

Отзывы:

Бренды по названию

Популярные бренды