Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
26/04/11
Working Instructions WIDOS HRG 10, Segment
Page 19 of 49
4.4 Angle setting at the clamping device
•
For this purpose detach the hexagon socket screws at the adaptor plate in the front and
rear, adjust the clamping ring to the requested angle (up to 11.25°) by scale and marking
(only attached to one side).
•
Fix the angle by tightening the hexagon-head screws.
Make sure that both clamping rings do not have contact at the top!
Marking
Scale
Hexagon-head screw
