Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
26/04/11
Working Instructions WIDOS HRG 10, Segment
Page 18 of 49
4.3.1 How to work with the planer
The flexible supporting fork of the planer is locked by the security bolt.
Prior to inserting the planer into the basic machine you
must
turn the safety bolt for the planer support upwards
(left image)
Remove the safety bolt by pulling-out, the supporting fork is
now hanging downwards.
Suspend the planer from the ring bolt e.g. by a crane and
put it between the clamping tools in a way that the
supporting forks of the planer are locked in the supporting
forks of the basic machine.
Necessarily
put the safety bolt again into the drill hole
(upon releasing the safety bolt, the handle must turn
downwards otherwise it is not applied correctly)
Switch the planer on/off by the on/off switch.
Turn and remove the safety bolt again before you remove
the planer from the basic machine and put the safety bolt
back in before inserting the planer into the reception box.
Safety bolt
Flexible
supporting fork
