widos 4000 WM, Перевод инструкций по эксплуатации

Страница: 40 / 87

Kunststoffschweißtechnik
Foundation: 2207, 2208 DIN 16932 German association for welding
Use for:
4000
1 bar on manometer:
55
N
PE 80
The value for heating element temperature is between 200° C - 220° C.
The
smaller
the pipe wall the
higher
the temperature.
PE 100
The standard value for heating element temperature is 220° C.
Increase the change-over time and the welding pressure time at PE 100 as fast as possible !
time to
change- reach full
over welding cool-down time
0,15 (PE)
time pressure
pressure in
T
desired temperature
time
pipe pipe SDR bead-up circular heat-up max. time welding cool-
diameter wall pressure bead time change- to reach pressure down
OD (s) [bar] min. [s] over welding [bar] time
[mm] [mm] [mm] time pressure [min]
[s] [s]

63
1,8 41,0 1 0,5 20 4 4 1 2
63
2,0 33,0 2 0,5 20 4 4 2 2
63
2,5 26,0 2 0,5 25 4 4 2 3
63
3,0 21,0 2 0,5 30 4 4 2 4
63
3,6 17,6 2 0,5 36 5 5 2 5
63
3,8 17,0 2 0,5 38 5 5 2 5
63
4,7 13,6 3 1,0 47 5 5 3 6
63
5,8 11,0 3 1,0 58 6 6 3 8
63
7,1 9,0 4 1,5 71 6 6 4 10
63
8,6 7,4 5 1,5 86 7 7 5 12
75
1,9 41,0 2 0,5 20 4 4 2 2
75
2,3 33,0 2 0,5 23 4 4 2 2
75
2,9 26,0 2 0,5 29 4 4 2 3
75
3,6 21,0 3 0,5 36 5 5 3 5
75
4,3 17,6 3 0,5 43 5 5 3 6
75
4,5 17,0 3 1,0 45 5 5 3 6
75
5,6 13,6 4 1,0 56 5 5 4 8
75
6,8 11,0 4 1,0 68 6 6 4 10
75
8,4 9,0 5 1,5 84 7 7 5 12
75
10,3 7,4 6 1,5 103 7 7 6 14
in welding area
Table for PE
bead-up heat-up
Additional to the given bead-up force and to the welding force the moving force of the support must be added !
welding area
P (N/mm²)
20.08.2014 Working instructions WIDOS 4000 WM Page 40 / 1 of 68