widos 4000 WM, Перевод инструкций по эксплуатации

Страница: 23 / 87

Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
20.08.2014 Working instructions WIDOS 4000 WM Page 23 of 68
4.3. Elements at the heating element
No. Denomination: Function:
19 Display of
temperature
- Digital indication of the adjusted heating element
temperature, three different display indications possible.
20 Thermostat - For setting the required temperature.
As soon as the machine is switched on it starts heating up to the desired temperature.
Set the temperature with a screw driver at the adjusting knob.
2.2.0
Display: DESIRED tempe blinking points between the numbers.
The heating element is being heated up, the desired temperature is not
yet reached. This display disappears after short time, followed by three
lines.
- - -
Display: Three lines.
The heating element is being heated up, the desired temperature is not
yet reached.
1 8 0
Display: ACTUAL temperature (without blinking points).
Appears as soon as a temperature of > 170 °C is reached and rises
continuously to DESIRED temperature. The desired temperature is
maintained by a certain pulse-position ratio.
4.4. Main switch
You activate and shut down the machine by the main switch.
Shut down the machine and secure switch against
unintentional activation while working within the machine.
19
20