Widinovations wicllaminator L300, Руководство пользователя

Страница: 14 / 38

widinovations Confidential
©
14
7. Lower bars
8. Central bar
9. Stands
4.2.
Assembling the widlaminator L300
Releasing the main body from the base of the box.
Cut the strap fixing the main body to the base.
Cut the strap fixing the bars to the feet and slide the out the side.
Remove all sides of the box.
4.2.1.
Assembling the support
Assembly of the support structure is the first step to assemble the machine.
The stands are symmetrical and can be attached on
either side.
Collect the M8 x 16mm screws, from the accessory box
and place them into the holes at the center of the stands (9)
attaching them to the central bar (8) and tighten them into
place. Repeat the process for the opposite side.
Screw the lower bars (7) into the stands (9) as shown in
the image.
Parafusos
M8 x 16mm
Screws
M8 x 16mm