FX 250 / FX 500 User Manual
60
Satellite Selection
The default Satellite Selection is in
Auto
mode. In
Auto
mode, the UE will scan all the visible
satellites and track the satellite with the most optimum elevation angle or the last used
satellite.
Note:
Changing the satellite selection will terminate any existing active voice/fax call or data
connections.
Follow these steps to change your satellite selection:
1. Click on
Setup icon
2. Click the
Satellite Selection
to view the visible satellites.
The visible satellites will be displayed for your selection.
It also displays the satellite information that your Antenna Unit’s is locked on to.
3. Click on your choice of visible satellites.
4. Click the Select button to point the antenna to the selected satellite in
exclusive mode. The satellite selection will be saved, and each time you power up
the UE, the satellite selection choice will remain until you make the next selection
change. The UE will track the newly selected satellite even if the elevation angle is
not optimum.
5. Click Refresh to refresh the Satellite list.