background image

FX 250 / FX 500 User Manual

44

 Settings Menu

The 

Settings

 menu provides the following sub menus to 

configure the BDU:

 

Ciphering mode

Contain options to enable/disable the use of ciphering mode 
between the network and BDU. 

Note:
Status icon 

 is displayed in the Main Display screen when 

ciphering is enabled.

 

Ethernet

Allow you to configure settings related to Ethernet connection.

 

•   Transceiver IP Address

 

 

Specify the IP address of the BDU. The default IP address of the BDU is  

 

 

 

192.168.1.35

 

•   Subnet Mask

 

 

Specify the subnet mask of the BDU. The default subnet mask of the BDU is  

   255.255.255.0

 

•   DHCP settings

 

 

Display the status and settings of the DHCP server.

 

  q

   

DHCP server

 

 

 

Display the status of the DHCP server.

 

  q 

Start IP address

 

 

 

Display the start IP address of the DHCP server. Default start IP address is  

 

 

 

192.168.1.40. 

  

q

 

End IP address

 

 

 

Display the end IP address of the DHCP server. Default end IP address is  

 

 

 

192.168.1.59. 

 

  q 

Primary DNS

 

 

 

Display primary DNS server address. Default primary server is 172.30.66.7.

 
 

  q 

Secondary DNS

 

 

 

Display secondary DNS server address. Default secondary server is  

 

 

 

172.30.34.7.

Содержание FX 250


























































































































Отзывы: