Wickes Aquatronic 4 Ultra, Инструкция по установке и эксплуатации

Страница: 18 / 28

Aquatronic 4 Ultra electric shower
Temperature
control
High & Economy
Cold
Start/Stop
button
note: If the stated flow rate required for the
unit cannot be met due to low water pressure,
it will be necessary to operate the unit on the
ECONOMy setting during the warmer months
because of flow rate limitations entering the unit.
to adjust the shower temperature
The water temperature is altered by increasing
or decreasing the flow rate of the water through
the shower via the temperature control
(fig.) .
After finding a suitable showering temperature,
the temperature control can be left as the
normal setting and should only need altering
to compensate for seasonal changes in ambient
water temperature.
note: The preferred position on ECONOMy will
give a different temperature to the same position
on HIGH.
to decrease the shower temperature
Turn the temperature control anti-clockwise; this
will increase the flow of water through the shower.
to increase the shower temperature
Turn the temperature control clockwise; this will
decrease the flow of water through the shower.
note: It is advisable to be certain that the
showering temperature is satisfactory by testing
with your hand before stepping under the
showerhead. There will always be a time delay of
a few seconds between selecting a flow rate and
the water reaching the stable temperature for
that flow rate.
CAuTIon:
This appliance is not intended
for use by persons (including children)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of
the appliance by a person responsible for
their safety.
children should be supervised to ensure that
they do not play with the appliance.
Fig.