Usage and Maintenance Instructions
Perching Stool -
DL06250
www.careco.co.uk
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
The Perching Stool provides a comfortable and stable seat for those unable to stand for long periods.
The sloping seat gives the user a relaxed position when sitting and helps the user to rise. The Perching
Stool can be used in the shower, bathroom or kitchen.
Dimensions:
Seat height: 540-680mm
Seat width: 320mm
Seat depth: 260mm
Width between arms: 465mm
Before assembly:
Check components carefully before assembly.
Do not assemble if any parts are damaged.
Do not assemble if any parts are missing.
Assembly instructions:
No tools are required to assemble the Perching Stool.
1. Attach the leg assembly into the seat using the groove on
the seat tube (see diagram 2).
2. Screw the plastic hand nut on the leg to the seat until it is
hand tight. Take care to align the plastic mouldings before
tightening.
3. Repeat for all 4 legs.
4. With the stool in an upright position, fix the armrests to
the product by pressing the spring clips flat to the tube and
allowing the tube to enter the seat tube. Push the armrest
tube into the seat until both clips click into position.
Note: There is a left hand and right-hand arm rest. When
assembled they should align to the slope of the seat (see
diagram 3).
5. Fix the backrest using the same method as described for
the armrest.
Note: The Perching Stool can be used without the armrests or
backrest. If this is required, seal the ends of the tube with the
end caps supplied to prevent water ingress.
Diagram 1
Diagram 3
Diagram 2
The angle of
the armrest and
seat should be
the same.
