14
/
65
www.wireless-tek.com
Pic 10 Serial port configuration page
（
3
）
Multi-user management configuration page
Figure 11 shows the Multi-user management configuration page, through this page users
can modify the switch's anonymous user (admin) password.Telnet and Web use the same
anonymous user password when multiple users are not enabled.Passwords are case sensitive
and you can set up to 16 characters at most.If you want to change the password, the user
needs to enter the new password twice, once the user clicks the application key, the new
password is activated,If the switch does not enable multi-user, will display the login dialog box
(shown in Figure 7), the user needs to re-login page, the user must enter a new anonymous
user password login WEB page.
At the same time through this page users can configure multiple users, the switch default
no multi-user, that is the default does not enable multi-user management functions, then login
does not require multi-user user name and password authentication.For Telnet, when adding a
user name, the multi-user management function is enabled, and when all the users are deleted,
the multi-user management function is turned off again.For the Web, when a user name is
added, if be the privileged user,the multi-user management function is enabled, when all the
privileged users are deleted, the multi-user management function is closed again.When the
multi-user management function is enabled, the anonymous user password will not take effect,
login Telnet and Web need to multi-user user name and password authentication.When the
multi-user management function is closed, at this time if the anonymous user password is
configured, login Telnet and Web need to anonymous user password verification.
