8
Refresh:
to refresh the wireless AP’s IP address
Function:
Enable/Disable, default is Enable
Server IP address:
default is 192.168.200.1; can change to anyone you like, but pls note,
if server IP is 192.168.200.1, then wireless AP’s IP address will be one from
192.168.200.2 to 192.168.200.254, to 192.168.201.X, to 192.168.202.X... if server
address count is 1500.
Server Address Count:
default is 1500, can be 1~1500, based on the QTY of wireless
AP.
Effective Time:
can be 1~24 hours
Allocated AP number:
show the QTY of wireless AP which assigned IP address by this
WLAN controller.
When setup the above data, click Apply to save it.
AP address information list: to show wireless AP’s model number, IP address, MAC
address and running time.
4.1.3: Zero Config
This function make wireless AP plug and play, but recommend to
configure this function
before connect wireless AP into this network
as following reason:
1. If configure this function after wireless AP connected into this network, then all wireless
AP should be reboot, then wireless AP will get the configuration from Zero config.
2. There is one group only in Zero config, which will make all wireless AP in same SSID,
password, channel..., if want to different AP in different group, recommend Device Group
function in 4.1.4.
