10
Channel:
Auto in default, but recommend to setup channel by manual based on
environment.
RF Output Power:
100%, 75%, 50%, 25%, 12.5%, can adjust it based on application.
More RF Power, mean more WiFi Range;
Coverage Threshold:
This make end users to connect the outdoor CPE with stronger
signal strength;
For example, If one outdoor CPE with -80dBm coverage threshold data, another outdoor
CPE with -95dBm coverage threshold data, then end users will connect the outdoor CPE
with -95dBm coverage threshold always even this outdoor CPE with very weak signal
strength.
After setup all the data, click Apply to add zero config group as follow:
Please note, click config button
, can modify the parameters if need.
Delete Group:
If need, can delete this zero config group.
4.1.4 Device Group
In device group, can be more than one group, then different AP can be in different group.
The steps is: Add Group----Config Group----Click
to Add AP into this group----Wireless
AP will get data from this group.
Please note, the configuration in device group is same as Zero Config.
Add Group
