PAGE 8 — 732W
9)
Place a small amount of glue on the left side of the Top and the mitered corner of the Left Crown
Moulding (I) before carefully aligning the moulding so that the front mitered corner matches up with
the corner of the Front Crown Moulding (J). Starting from the back, attach the Left Crown Moulding
to the side panel with two 1¼" Black Screws (ZI) through the predrilled holes in the side panel into
the crown moulding.
Repeat above steps for the Right Crown Moulding (K).
FIG. 9
8)
With unit standing upright, place a small bead of glue along the front edge of the top. Insert the
notch on the backside of the Front Crown Moulding (J) over the front edge of the Top, align it side
to side on the crown spacer and attach with three 2" Black Screws (ZJ) through the predrilled holes
in the crown.
FIG. 8
GLUE
J
K
ZI
ZI
J
I
(INSERT BACK SCREWS FIRST)
GLUE
GLUE
BACK
FRONT
NOTCH GOES
OVER TOP
TOP
