Whites MXT PRO, Руководство пользователя

Страница: 9 / 40

Batteries
Standard Battery Holder
1.
Slide open the battery holder lid (decal side of bat-
tery holder) by applying gentle upward pressure on
the tab of the door so that it unlocks. Slide the door
away from the battery box exposing the cell positions.
2.
Remove any old cells from the holder. Note the (+)
and (-) positions of each cell and the (+) and (-) for
each position marked inside the cell tray. Install new
“AA” cells noting carefully the correct (+) and (-) posi-
tions. If the cells are installed incorrectly, the detector
may require service by an Authorized Service Center.
3.
Slide the door closed so that it snaps securely.
4.
Insert the battery holder into the detector so that
the decal is facing down, with the battery holder
door tab and metal contact points facing toward the
inside of the battery compartment. Close the battery
compartment door and secure the two latches on the
bottom of the case. Hook the front of each latch first,
and then press down on the rear.
Using the
Standard Battery Holder
1.
The standard battery holder holds eight “AA” cell
batteries equaling 12 volts total. Alkaline batteries are
recommended for use with this model. During normal
searching conditions you can expect about 40 hours
of hunting time from a quality set of eight alkaline bat-
teries.
2.
Non-alkaline batteries can be used in this holder.
When non-alkaline batteries or rechargeable “AA”
cells are used, detecting time (before replacement/
recharge) may be reduced to about 30-35 hours.
3.
The battery voltage appears automatically on the
display when the Gain is used to turn the MXT Pro
“ON”. Once the batteries become weak (8 volts) “Lo
Bat” will automatically appear on the display during
searching. At that point the batteries should be re-
placed. Alkaline batteries provide some reserve time
after “Lo Bat” appears, rechargeable batteries do not.
4.
The battery compartment opens by gently pulling
down on the front of each of the two latches (on the
bottom of the control box) releasing the catch and
hinging open the door.
Headphone use prolongs all battery life. Battery life
will vary a great deal with temperature, number of
target signals, battery type, brand, and shelf life. Al-
kaline Batteries may be used (in a pinch) well into the
“Lo Bat” indication. Rechargeable batteries cannot.
When traveling far from home it is always a good idea
to carry 8 extra penlight alkaline batteries with you.
Backlight use will slightly reduce battery life, 10% at
the lowest brightness, 20% at medium, and 30% at
the highest setting.
Chapter 1 MXT
Pro
Batteries