Whites MXT PRO Скачать руководство пользователя

Страница: 3 / 40

Congratulations and thank you for choosing

White’s MXT Pro.

The MXT series, which by design marry “versatility & high performance” with “simplicity of use”, is a wildly

successful metal detector design. I’m proud to put my name on the MXT Pro. As well, I’m proud the MXT

is grouped among a handful of landmark metal detector designs. Among the highest tribute, success in

the field has earned the MXT “benchmark status” for which all other metal detectors are judged.

Listening to successful MXT users, the MXT Pro adds the three things MXT users have been asking

for, Backlight, Multiple Tone ID, and Ground GRAB, a convenient way to update ground tracking from a

locked setting or temporarily lock ground tracking for multiple passes over questionable signals.

This instruction manual will give you a good understanding of the basics. There are no substitutes for field

experience. Practice using your MXT Pro and then study this manual further. Before long, you may well

be teaching the experts a thing or two.

It is with pride we put our “American Made Label” on every metal detector we build. At our facility here in

Sweet Home, Oregon, USA, we’ve been proudly designing, building from scratch, and distributing world-

wide, the world’s finest metal detectors for nearly 60 years.

It has always been my philosophy to keep our people in Sweet Home, Oregon working by keeping our

customers happy. I’m proud of our metal detectors and the people here at White’s who build them for you.

Happy Hunting!

President

White’s Electronics, Inc.

“I am proud to say

all White’s Metal Detectors are

built in Sweet Home, Oregon USA”

Содержание MXT PRO









































Результаты поиска

Содержание MXT PRO

Отзывы:

Похожие инструкции для MXT PRO

Бренды по названию

Популярные бренды

Whites MXT PRO, Руководство пользователя

Результаты поиска

Содержание MXT PRO

Отзывы:

Похожие инструкции для MXT PRO

Бренды по названию

Популярные бренды