Step 4: Base Board Riser
Gather the base board part
No. 3, 4, 5 & 4 x 25mm nails.
Step 5: Nailing Base Board Riser
Place and nail the corners as shown in Diagram 5.
Step 6: Aligning to Base Board
Place your assembled
Base Board
on
your assembled
Base Board Risers
as
shown in Diagram 6.
Note: The position of the
Base Entrance
Riser
in Diagram 6.
Step 7: Nailing Frame & Base
Use your
54 x 25mm nails
to attach base
board to
Base Board Risers.
IMPORTANT
The
Base Entrance Riser
should be at
least 2.5cm away from the front edge of the
base board.
The
Base Back Riser
should sit flush with
the back edge of the base board.
Diagram 5
Diagram 6
Diagram 7
Diagram 8
If unclear, view this manual’s cover to see
complete assembled beehive. You will notice
some space between the
Entrance Riser
&
Base Board
edge.
