Step 1: Marking Lines
Place the
Base Board
down on your
workspace. See Diagram 1 to identify where
you need to use your pencil to mark where the
cleats will be placed.
Note: The side which is facing upwards to you
will form the outside base of your beehive.
Step 2: Placing Cleats
Place the edge of your
2 x
Cleats
within the 14 cm pencil
mark as shown in Diagram 2.
14cm
14cm
Diagram 1
Diagram 2
Diagram 3
Diagram 3
14cm
10cm
Step 3: Nailing Cleats
Use
4 x 36mm
nails to attach the
Cleats
to
the
Base Board.
Note: We suggest placing the nail 10cm in
from the edge of the
Cleats
on each side.
Once done put the assembled baseboard &
cleats to the side.
Completed base board & cleats should
look like Diagram 4.
Upside-down
Preview of your assembled base board & cleats.
14cm
14cm
Diagram 4
