WHITEHALL MANUFACTURING
• P.O. BOX 3527 • City of Industry, CA 91477-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
Instructions for Operation and Care of Thermo-Therapy Dry Heat Therapy
3
Thermo-Electric’s Thermo Therapy Units are designed
to safely provide the benefits of Celstim
®
- a specially
processed, granulated, sterilized cellulose successively
filtered to removed the maximum number of fines- being
held in animated suspension and gently and warmly
massaging a patient’s hand, wrist, arm or foot, ankle, leg.
Model TT-101 is designed principally for home use – but
can be used in small clinics and offices – and is constructed
with a variable speed blower, variable heat, front and top
treatment ports and obtains its air supply through a bottom
located filtered and sound baffled fresh air inlet.
Although the unit is small and compact and the opportunity
for noise control is limited, the unit operates only slightly
louder than our larger units because of strategically placed
sound baffles.
Model TT-101L is of the same construction as the TT-101,
but possesses a treatment chamber that is 3” deeper and 2”
longer than the TT-101 and is designed for the small clinic
or office.
An optional stand is available for both the TT-101 and
TT-101L models.
Model TT-202 is floor mounted. TT-202 has dual blowers
and speed controls as well as dual top and rear treatment
ports. The unit has permanently installed rubber pads along
the top to provide patient under arm comfort.
All Thermo-Theraphy Units have an elevated top edge on
3 sides to best capture and prevent the spread of errant
Celstim®.
The controls located on the control panel are of rugged,
long lasting “mechanical” design and any single controlling
component can individually and replaced.
On all models, the air distribution assembly is separated
from the patient by a patient protection grill remaining
at nearly the same temperature as the Celstim and also
eliminates any shocking from static electricity.
The rear upper panels can also be removed by qualified
service personnel and the blowers, heating element, etc.,
are easily and quickly removed and replaced in the event
of a malfunction. In fact, the blower(s) are mounted on a
board which with the removal of one screw slides out of
immediate access.
For additional safety, the heating element’s compartment
is lined with metal and dual safety switches set specifically
not to exceed 275°F (135°C). Also, a fourth thermostat is
located behind the control panel which mimics the control
thermostat and assures a maximum Celstim temperature of
125-128°F (51.7-53.3°C).
So, congratulations on your new Thermo-Therapy Unit –
we welcome your comments, recommendations and/or any
questions.
