User Manual – Network Video Recorder
72
Copy Schedule to Other Channels
5.3 Configuring Motion Detection Recording and Capture
Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion
detection event takes place, the NVR can analyze it and do many actions to handle it. Enabling
motion detection function can trigger certain channels to start recording, or trigger full screen
monitoring, audio warning, notify the surveillance center and so on. In this chapter, you can follow
the steps to schedule a record which triggered by the detected motion.
Step 1
Enter the Motion Detection interface.
Menu>Camera>Motion
Motion Detection
Step 2
Configure Motion Detection:
1)
Choose camera you want to configure.
2)
Check the checkbox after
Enable Motion Detection
.
3)
Drag and draw the area for motion detection by mouse. If you want to set the motion
detection for all the area shot by the camera, click
Full Screen
. To clear the motion
detection area, click
Clear
.
4)
Click
Settings
, and the message box for channel information pops up.
