WHITEBOX WB-G604 Скачать руководство пользователя страница 7

Страница: 7 / 207

User Manual – Network Video Recorder

⚫

Supports S.M.A.R.T. and bad sector detection.

⚫

HDD group management.

⚫

Supports HDD standby function.

⚫

HDD property: redundancy, read-only, read/write (R/W).

⚫

HDD quota management; different capacity can be assigned to different channel.

⚫

For DS-9600NI-I8 and DS-9600NI-I16 series, RAID0, RAID1, RAID5, RAID6 and RAID 10 are
supported.

⚫

Hot-swappable RAID storage scheme, and can be enabled and disabled on your demand. And
16 arrays can be configured.

⚫

DS-9600NI-I8, DS-8600NI-I8 and DS-9600NI-I16 series NVR support disk clone to the eSATA
disk.

Recording and Playback

⚫

Holiday recording schedule configuration.

⚫

Continuous and event video recording parameters.

⚫

Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm
VCA, and POS (for I series NVR only).

⚫

8 recording time periods with separated recording types.

⚫

POS information overlay on image by I series NVR.

⚫

Pre-record and post-record for alarm, motion detection for recording, and pre-record time for
schedule and manual recording.

⚫

Searching record files and captured pictures by events (alarm input/motion detection).

⚫

Tag adding for record files, searching and playing back by tags.

⚫

Locking and unlocking record files.

⚫

Local redundant recording and capture.

⚫

Provide new playback interface with easy and flexible operation.

⚫

Searching and playing back record files by channel number, recording type, start time, end
time, etc.

⚫

Supports the playback by main stream or sub stream. ( I series NVR)

⚫

Smart search for the selected area in the video.

⚫

Zooming in when playback.

⚫

Reverse playback of multi-channel.

⚫

Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when
playback, and locating by dragging the mouse.

⚫

Supports thumbnails view and fast view during playback.

⚫

Up to 16-ch synchronous playback at 1080p real time.

⚫

Supports playback by transcoded stream.

Содержание WB-G604
















































































































































































































Результаты поиска

Содержание WB-G604

Отзывы:

Бренды по названию

Популярные бренды

WHITEBOX WB-G604, Руководство пользователя

Результаты поиска

Содержание WB-G604

Отзывы:

Бренды по названию

Популярные бренды