User Manual – Network Video Recorder
66
Recording Parameters
Step 2
Parameters Setting for Recording
1)
Select
Record
tab page to configure. You can configure the stream type, the resolution,
and other parameters on your demand.
Video Encode
: select the video encoding to H.265 or H.264.
Enable H.264+ Mode
: check the checkbox to enable. Once enabled, the
Max. Bitrate
Mode
,
Max. Bitrate(Kbps)
and
Max. Bitrate Range Recommend
are not configurable.
Enabling it helps to ensure the high video quality with a lowered bitrate.
The H.265 and H.264+ should be supported by the connected IP camera.
2)
Click the
More Settings
button to set the advanced parameters for recording and then
click
OK
button to finish editing.
More Settings
Pre-record: The time you set to record before the scheduled time or event. For example,
when an alarm triggers the recording at 10:00, and if you set the pre-record time as 5
seconds, the camera records at 9:59:55.
