White Magic PRO 1900, Руководство пользователя

Страница: 29 / 90

UPHOLSTERY CLEANING OPERATION
We recommend using a White Magic upholstery tool designed for truck-mount pressures which
has an automatic high pressure solution bleed-off. Cleaning can be performed with either a sin-
gle or a dual wand. When cleaning upholstery change to a chemical recommeneded for wet
cleaning and take all necessary precautions to ensure satisfactory results.
PRESSURE WASHING OPERATION
CAUTION
Use extreme caution not to come in contact with the spray or personal injury could result.
Reduce the vacuum load on the system to about 10” Hg (but do not allow vacuum to go
below 8” Hg). Adjust the machine high pressure output as desired up to a maximum of
1000 psi. With the pressure washing tool valve open, adjust chemical draw reading on
flow meter as desired. When pressure washing is completed,
re-adjust pump pressure and reconnect the vacuum hose to the system.
WATER EXTRACTION OPERATION
1. Prepare the machine in the same manner as you would for normal carpet cleaning;
assure that there is an adequate supply of water in the fresh water tank and that the
Cat pump and pulse pump have been properly primed.
2. Flip the PUMP POWER switch to the “OFF” position.
3. Adjust the TEMPERATURE CONTROL KNOB to “HI”.
4. Flip the OPERATION MODE switch on the upper face panel to the “WATER RECOV-
ERY” position.
5. Connect the vacuum hose directly to the optional filter box assembly or directly
to the recovery tank. Do not use the active hose reel or excessive vacuum loss
will occur.
6.
White Magic recommends running the machine at 2200 RPM for single
wand operation or 2700 RPM for dual wand operation. Proceed with water extraction.
7. Drain recovery tank as necessary. Return machine to normal settings when complete.
25