DRAINAGE OPTIONS
Your new appliance as delivered is setup such that the condensed water generated during
drying is pumped into the water bottle. The bottle will then require emptying at the end of every
drying cycle.
Alternatively, the appliance can be converted to allow the condensed water to be pumped to
your household waste pipe. Connecting your dryer to a household waste pipe will mean you
will not need to empty the water bottle:
1 - Remove the blue integral drain hose from the connector, at the left rear of the dryer. A pair
of long nosed pliers may be required to remove the hose.
2 - Attach the condensing drain hose.
3 - Locate the drain hose into a wash basin, sink or waste pipe.
4 - To return the dryer to pump the condensed water into the water bottle, simply remove the
condensing drain hose and re-attach the integral drain hose as per points 1 and 2 above.
