APPLIANCE FEATURES AND PROGRAMME OPTIONS
Programme selection -
Rotate the Programme Selector Knob from the ‘Off’ position to the
required programme. Additional features of Buzzer, Quick (only available on the Denim,
Extra Cupboard Dry & Cupboard Dry programmes), Low Heat (available on all Cotton,
Synthetics and Time programmes) and Delay Start can also be selected. Once you have set the
required drying cycle, press the Start/Pause button to begin the drying cycle.
End of drying cycle
-
All drying programmes end with a 10 minute cooling phase. When the
load is ready to be removed the ‘End’ Indicator will flash, the display will show ‘0:00’ and the
buzzer will sound. Unload the laundry from the appliance and turn the Programme Selector to
the ‘Off’ position. Switch off the power and unplug the power cable.
Anticrease
- If the laundry is not removed at the end of the drying cycle then the dryer
automatically enters an anticrease phase in order to prevent creasing (30 minutes maximum).
If the door is opened during the anticrease phase and when the anticrease phase has finished,
the display will show ‘End’. Remove the laundry, turn the Programme Selector to the ’Off’
position and switch off the power.
Moisture Sensor
- this function automatically senses the moisture of the clothes and will
automatically adjust the drying time according to the weight of clothes put in the dryer. This
function will automatically activate during the drying procedure on all Cotton and Synthetics
Programmes and the Underwear programme.
Time programmes
- A drying time of 30, 60 or 90 minutes can be selected.
Buzzer –
The default setting is for the buzzer function to be off. Press the Buzzer button to
select the buzzer function and the Buzzer Indicator will illuminate. The buzzer will now sound
when a button is pressed. The buzzer will automatically sound if the door is opened, if the heat
exchanger is removed, if the water bottle is full or when the cooling phase of the programme
is complete.
Quick
- The Quick option can be selected with the Denim, Extra Cupboard Dry and Cupboard
Dry Cotton programmes. The indicated drying time will be reduced by 10 minutes. The Quick
Indicator will illuminate.
The Quick option cannot be used in conjunction with the Low Heat option.
Low Heat
- Low Heat can be selected on all Cotton, Synthetics or Time programmes. The
Low Heat Indicator will illuminate and the drying cycle will operate at a lower temperature.
The indicated drying time will be increased. Low Heat cannot be used in conjunction with the
Quick option.
Delay Start
- all programmes can be used in conjunction with the Delay Start feature. This
function is used to delay the start of the drying cycle up to a maximum of 24 hours. Pressing
the “Delay Start” button once increases the delay time by one hour. Pressing and holding the
“Delay Start” button will scroll the display.
