WhisperKool WK 1600, Руководство пользователя

Страница: 10 / 28

Installation
-8-
Carefully remove your WhisperKOOL unit
from the box. Do not destroy your packing
material, as it provides the only safe
means of transporting the unit. Units
weigh 65–100 pounds and are
cumbersome for one person to carry. We
recommend that you get someone else to
help you during the installation process.
Testing Unit
Place the WhisperKOOL system on a
tabletop to prepare it for installation and
testing. Locate the by-pass plug and
insert it into the thermostat plug, located
on the front of the WhisperKOOL System.
Next, plug the system into a live electrical
outlet and turn the unit on. The system
should begin cooling. The system may
take up to 10 to 15 minutes before
running cool. Once the operation has
been tested, turn the unit off, unplug the
unit from the electrical outlet, and remove
the by-pass plug.
Note: If the system does not seem to be
running cool after 15 minutes, please
refer to the Troubleshooting Guide on
page 15.
Before installation, use the by-pass test plug
to test the unit.
Attach precut foam tape to the unit’s flange.
Foam Tape
Adhesive Covering
Flange
Test Plug
Applying Insulation Tape
Locate the four precut pieces of black
foam tape included with your system.
There should be two larger pieces and two
smaller pieces. Start with the large
pieces. Peel back the white-paper
adhesive covering, and attach the large
pieces to the top and bottom of the unit
flange. Then follow with the two smaller
pieces on the right and left sides. This
foam creates a tight seal between the
unit’s flange and the wall (see
illustration).