Whisper Power 12 VDC-2000 VA, Руководство пользователя

Страница: 13 / 36

WhisperPower Inverter / Battery Charger 13
Model AC Output Socket Type AC Output Thermal Breaker
120VAC series NEMA 5-20 GFCI 20A
Model
By-Pass Mode Current (Maximum) Inverter Mode Current (Maximum)
Total AC
Output
AC Output
Hardwire
AC Output
Socket
Total AC
Output
AC Output
Hardwire
AC Output
Socket
2000W/120VAC 30A 30A GFCI 20A* 16.7A 16.7A GFCI 16.7A
3000W/120VAC 30A 30A GFCI 20A* 25A 25A GFCI 20A*
* Limited by AC Output Thermal Breaker connected in series with the AC Output Socket.
** Limited by Inverter maximum AC Output Current during inverter mode.
J Display Port
The port is used to connect to the Multi-Function Display of the unit.
K Multi-Function Display
The display is used to provide unit information and for unit setting.
L BTS Port
The port is used for connecting to the optional Battery Temperature Sensor. The thermistor
installed inside the ring terminal is used to measure the battery terminal temperature and the
unit will make compensation on battery charging voltage for battery charging.
M Digital Input Port, Program Port, Can-BUS Port
• Digital Input Port
This port is used for connecting to a slave contact of an external Transfer Switch or Relay
to control the charger input current limit.
• Program Port
This USB port is for system firmware upgrade use only. This CANNOT be used for
charging Smartphones or USB powered devices. Mis-use of this port can potentially
damage the unit and is not covered by the warranty. This USB type A port is located on
the Inverter-Charger and an extra port that shares the same function is also located on
the side of the Multi-Function Display.
• CAN-BUS Port
This is for unit communication through the CAN interface. Mis-use on this port can
potentially damage the unit and is not covered by the warranty.