Integrated Hood
Models include W3M06S3, W3M09S3, W3MD09S3, W3MD12S3 and A3W12S3
WARNING
DIMENSIONS ARE ACCURATE AT THE TIME OF PRINTING, PR KITCHEN & WASHROOM SYSTEMS PTY LTD RESERVES
THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. FOR BUILDING PURPOSES THE UNIT SHOULD BE
PROVIDED TO THE CABINET MAKER / BUILDER / KITCHEN DESIGNER FOR EXACT MEASUREMENTS.
STEP 1:
To install into your overhead cupboard, several holes may need to be cut into shelves
to enable the ducting to exit the cavity. Ensure the hood is mounted as close to the
centre of the cooking surface as possible. Fitting a shelf 290mm (Undermount 60 &
90) or 320mm (Undermount 90mm Super Deep) or 332mm (Undermount 120) from
the base of the cupboard.
NOTE:
The height of the underside of the hood body must be a minimum of 600mm above
an electric cooktop & 650mm above a gas cooktop and a maximum height of
1200mm. If the instructions of the hob specify a greater distance than the minimum
detailed, this shall be the minimum height for installation. Building codes that
stipulate a minimum dimension may vary from state to state, please check with your
local council prior to installation.
STEP 2:
Cut out a central 202mm hole in the shelf for ducting, matching the holes position
to that of the outlet on top of the hood. Additional holes might need to be cut to feed
the duct out to the roof cavity.
STEP 3:
Refer to Part 2: Motor Installation Guide.
STEP 4:
Remove the screws from within the main body of the rangehood along the back
above the grease trap, on the left and right side. Once the screws are removed, the
main body of the rangehood will separate away from stainless steel fascia.
STEP 5:
The returns on the main body are now exposed. These are used to fix the main body
on to the cabinetry.
STEP 6:
Place the hood in the cabinet in the level position ensuring that the controls and
display will be visible when standing in front of the unit.
STEP 7:
Using the six (6) mounting holes, screw the hood into position.
MAIN BODY
FASCIA
LIPS
RETURNS
RETURNS
RETURNS
GREASE TRAP
BAFFLE
FILTERS
OUTLET
MOUNTING HOLES
RETURNS
PART 1 : HOOD INSTALLATION GUIDE
