OPERATION - ELECTRONIC TOUCH CONTROL
Operating your control panel with the 4 button control
1: SPEED SETTINGS
1ST SPEED
When the LED is switched-off, non-prolonged pressing of the key will switch-on the hood at the 1st speed and illuminate the
respective LED. The function will switch-on when the key is released.
When the LED is switched-off and another speed is activated, pressing the key will imply selection of the 1st speed,
switching-on of the respective LED and switching-off of the LED associated with the speed that was previously selected.
When the LED is on, pressing the key will imply switching-off the LED and MOTOR.
When the LED is switched-off, prolonged pressing (at least 3 seconds) of the key will cause activation of the
recirculation function.
During the recirculation function (with a duration of 24 hours), the LED will flash. From the activation of this function, the hood
will remain switched-on for one hour at the 1st speed, after which it will switch-off for 3 hours and then reactivate for
another hour.
These cycles are repeated until the time out.
With this function activated, the other functions cannot be selected. To remove this function, keep key 2 pressed for at least
3 seconds.
2ND SPEED
When the LED is switched-off and another speed activated, pressing the key (either prolonged or not) will imply the selection of
the 2nd speed, switching-on of the respective LED and switching-off of the LED associated with the speed that was previously
selected.
• When the LED is switched-off and no speed activated, pressing the key will have no effect.
• When the LED is switched-on, pressing the key 3 will have no effect.
• To switch the hood off, it will be necessary to firstly select the 1st speed and then repress the same key.
Operation - Electronic Touch Control
Operating your control panel with the 4 Button Touch Control:
18
3: Timer / Filter Alarm
The steady RED light
indicates that the fat filter alarm is activated (after 30 hours), to deactivate this alarm and zero the meters,
maintain the Key pressed for 3 seconds.
Flashing RED light
indicates that the timer function is activated. This function can only be activated if the motor is activated and run-
ning at any velocity when the Key is pressed (either prolonged or not). This function will cause the automatic switch-off of the hood
after 15 minutes.
With the Timer function activated, the hood can be switched-off by the operator in any case and the function will be deactivated.
The Timer function remains associated to a velocity. A change in the velocity, with the Timer function activated, will deactivate it.
1: 1st Velocity
When the
LED is switched-off
, non-prolonged pressing of the key will switch-on the hood at the 1
st
velocity and illuminate the respec-
tive LED. The function will switch-on when the Key is released.
When the
LED is switched-off and another velocity is activated
, pressing the Key will imply selection of the 1
st
velocity, switching-on
of the respective LED and switching-off of the LED associated with the velocity that was previously selected.
When the
LED is on, pressing
the Key will imply the switching-off the LED and MOTOR.
When the
LED is switched-off, prolonged pressing
(at least 3 seconds) of the Key will cause activation of the recirculation function.
During the recirculation function (with a duration of 24 hours), the
LED will flash
. From the activation of this function, the hood will
remain switched-on for one hour at the 1
st
velocity, after which it will switch-off for 3 hours and then reactivate for another hour.
These cycles are repeated until the timeout.
With this function activated, the other functions cannot be selected. To remove this function, keep Key 2 pressed for at least 3 sec-
onds.
2nd Velocity
When the
LED is switched-off and another velocity activated
, pressing the Key (either prolonged or not) will imply the selection of
the 2
nd
velocity, switching-on of the respective LED and switching-off of the LED associated with the velocity that was previously
selected.
When the
LED is switched-off and no velocity activated
, pressing the Key will have no effect.
When the
LED is switched-on, pressing the Key 3
will have no effect.
To switch the hood off, it will be necessary to firstly select the 1
st
velocity and then repress the same Key.
3rd Velocity
When the
LED is switched-off and another velocity activated
, pressing the Key (either prolonged or not) implies the selection of
the 3
rd
velocity, the switching-on of the respective LED and switching-off of the LED associated to the velocity that was previously
selected.
When the
LED is switched-off and no velocity activated
, pressing the Key will have no effect.
When
the LED is switched-on, pressing the Key 4
will have no effect.
To switch the hood off, it will be necessary to firstly select the 1
st
velocity and then repress the same Key.
4th Velocity
When the
LED is switched-off and another velocity activated
, pressing the Key (either prolonged or not) implies the selection of the
4
th
velocity, switching-on of the respective LED and switching-off of the LED associated to the velocity that was previously selected.
When the
LED is switched-off and no velocity activated
, pressing the Key will have no effect.
When the
LED is switched-on, pressing the key 5
will have no effect.
The forth velocity must remain on for a maximum of 14 minutes, after which, one must return to the third.
To switch the hood off, it will be necessary to firstly select the 1
st
velocity and then repress the same key.
2: Light
Light:
Briefly pressing key T6 will turn the light on and off. The T6 key will light up if the light is on.
