PART 2 : MOTOR INSTALLATION GUIDE
STEP 1:
Establish a suitable position in the roof or wall cavity for the KLEENAIR unit, ensuring that the distance between the
KLEENAIR unit and the outside vent is under 800mm. The KLEENAIR unit must be located a minimum of 3 metres from the
hood unit.
STEP 2:
Using the mounting bracket and screws, mount the KLEENAIR unit to a beam, truss or another appropriate structures
in the roof or wall space. Ensure the direction of airflow is toward the outside. The direction of airflow is marked on the
KLEENAIR unit.
STEP 3:
Cut a 200mm diameter hole in the wall or eave to enable the mounting of the external vent. Please ensure that the hole is cut
in a practical position to enable the FlexiDuct to be secured. Attach the FlexiDuct to the vent and then mount vent to the wall
or eave.
STEP 4:
Attach the FlexiDuct from the external vent to the outlet of the KLEENAIR unit using pipe clips. To minimise inefficiencies and
noise ensure the duct is pulled tight.
STEP 5:
Attach FlexiDuct from the KLEENAIR unit to the rangehood using pipe clips. Ensure that the duct is pulled tightly to ensure
that FlexiDuct remains firm and stable during operation. Avoid sharp bends in the duct. Gentle bends in the ducting are
recommended as it assists in muffling noise from the fan unit back to the rangehood. If the FlexiDuct needs to be extended
attach the two FlexiDuct ends using a RigidDuct insert, secured by pipe clips product tape.
STEP 6:
Attach the male plug of the KLEENAIR unit to the female plug of the rangehood to enable power supply to the fan
motor unit. An extension lead (not supplied) of up to five meters may be added if required.
Mounting Bracket
Outlet
Inlet
14
Part 2: Motor Installation Guide
Inline Solution
Positioning your KLEENAIR Unit:
It is recommended that the KLEENAIR INLINE unit be mounted in a
roof space or wall cavity. Please ensure that the KLEENAIR unit is
positioned in an environment that is free of other gases to enable
an efficient expulsion of the cooking bi-products and to ensure that
back draft of external gases doesn’t take place.
Please ensure the motor is positioned away from other exhausts
such as fire place chimneys, gas flues, etc. The inline unit an be
mounted so that it ducts directly through the wall or eave.
Step 1:
Establish a suitable position in the roof or wall cavity for the KLEENAIR unit, ensuring that the distance between the
KLEENAIR unit and the outside vent is under 800mm.
The KLEENAIR unit must be located a minimum of 3
metres from the hood unit.
Step 2:
Using the mounting bracket and screws, mount the KLEENAIR unit to a beam, truss or another appropriate struc-
tures in the roof or wall space. Ensure the direction of airflow is toward the outside. The direction of air flow is
marked on the KLEENAIR unit.
Step 3:
Cut a 200mm diameter hole in the wall or eave to enable the mounting of the external vent. Please ensure that the
hole is cut in a practical position to enable the FlexiDuct to be secured. Attach the FlexiDuct to the vent and then
mount vent to the wall or eave.
Step 4:
Attach the FlexiDuct from the external vent to the outlet of the KLEENAIR unit using pipe clips. To minimise ineffi-
ciencies and noise ensure the duct is pulled tight.
Step 5:
Attach FlexiDuct from the KLEENAIR unit to the rangehood using pipe clips. Ensure that the duct is pulled tightly
to ensure that FlexiDuct remains firm and stable during operation. Avoid sharp bends in the duct.
Gentle bends in
the ducting are recommended as it assists in muffling noise from the fan unit back to the rangehood.
If the
FlexiDuct needs to be extended attach the two FlexiDuct ends using a RigidDuct insert, secured by pipe clips or
duct tape.
Step 6:
Attach the male plug of the KLEENAIR unit to the female plug of the rangehood to enable power supply to the fan
motor unit. An extension lead (not supplied) of up to five meters may be added if required.
Positioning your KLEENAIR Unit:
It is recommended that the KLEENAIR INLINE unit be mounted in a
roof space or wall cavity. Please ensure that the KLEENAIR unit is
positioned in an environment that is free of other gases to enable an
efficient expulsion of the cooking bi-products and to ensure that back
draft of external gases doesn’t take place.
Please ensure the motor is positioned away from other exhausts such
as replace chimneys, gas fuses, etc. The inline unit can be mounted
so that it ducts directly through the wall or eave
Inline Solution
