manualshive.com logo in svg
background image

9

Cleaning Your Frost-Free Freezer

Frost-free means that you will not have to defrost your freezer. Frost is 
removed by air moving and collecting any moisture and depositing it on 
the cooling coil. The cooling coil periodically warms up enough to melt 
the frost, and it then flows down to the drain pan (located behind the 
base grille) where it is evaporated.

Complete cleaning should be done at least once a year.

1. Press and hold TEMP SETTING for 3 seconds to turn off cooling.

2. Unplug freezer or disconnect power.

3. Remove all frozen food. Wrap frozen food in several layers of 

newspaper and cover with a blanket. Food will stay frozen for 
several hours. You may also store frozen food in a cooler, 
additional refrigerator-freezer, or in a cool area.

4. Remove all removable parts from inside, such as shelves, bins, 

etc.

5. Hand wash, rinse, and dry removable parts and interior surfaces 

thoroughly. Use a clean sponge or soft cloth and a mild detergent 
in warm water. 

Do not use abrasive or harsh cleaners such as window sprays, 
scouring cleansers, flammable fluids, cleaning waxes, 
concentrated detergents, bleaches or cleansers containing 
petroleum products on plastic parts, interior and door liners or 
gaskets. Do not use paper towels, scouring pads, or other 
harsh cleaning tools. These can scratch or damage materials. 

To help remove odors, you can wash interior walls with a 
mixture of warm water and baking soda (2 tbs to 1 qt [26 g to 
0.95 L] of water).

6. Replace the removable parts.

7. Use the appropriate cleaning method for your exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft cloth 
and a mild detergent in warm water. Do not use abrasive or harsh 
cleaners, or cleaners designed for stainless steel. Dry thoroughly 
with a soft cloth. 

8. Clean the condenser coils regularly. Coils may need to be cleaned 

as often as every other month. This may help save energy.

Open the freezer door and remove the base grille by removing 
2 Phillips-head screws and pulling the grille toward you.

Use a vacuum with an extended attachment to clean the 
condenser coils when they are dusty or dirty.

Replace the base grille by aligning the ends of the grille with the 
leveling assemblies on each side and snapping the grille into 
place. Reinstall the screws.

9. Replace all frozen food.

10. Plug in freezer or reconnect power. 

11. Set temperature control to desired setting. See “Using the 

Control.”

Changing the Light Bulb

NOTE: Not all appliance bulbs will fit your freezer. Be sure to replace 
the bulb with one of the same size, shape, and wattage.

1. Unplug freezer or disconnect power.

2. Remove the light shield by squeezing the lens from the sides, 

pushing back and pulling down.

3. Replace bulb with a 40-watt maximum appliance bulb or LED bulb.

NOTE: LED bulb must be purchased from an authorized dealer.

4. Replace the light shield.

5. Plug in freezer or reconnect power. 

Power Interruptions

If the power will be out for 24 hours or less, keep the door closed to help 
food stay cold and frozen. 

If the power will be out for more than 24 hours, do one of the following:

Remove all frozen food and store it in a frozen food locker.

If a food locker is not available, consume or can perishable food at 
once.

REMEMBER: A full freezer stays cold longer than a partially filled one. 
A freezer full of meat stays cold longer than a freezer full of baked 
goods. If you see that food contains ice crystals, it may be refrozen, 
although the quality and flavor may be affected. If the condition of the 
food is poor, dispose of it.

Moving Care

When you are moving your freezer to a new home, follow these steps to 
prepare it for the move.

1. Remove all frozen food.

2. Unplug the freezer.

3. Take out all removable parts, wrap them well, and tape them 

together so they don’t shift and rattle during the move.

4. Clean the freezer thoroughly.

5. Tape the freezer shut and tape the electrical cord to the cabinet.

When you get to your new home, refer to the “Installing Your Freezer” 
and “Operating Your Freezer” sections for information on installation 
and setting the controls.

CARING FOR YOUR FREEZER

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Содержание WSZ57L18DH

























Отзывы: