Whirlpool WRT511SZDB Скачать руководство пользователя страница 6

Страница: 6 / 64

Refrigerator Doors

Tools Needed:

IMPORTANT:

■

Before you begin, turn the refrigerator control OFF. Unplug
refrigerator or disconnect power.

■

Remove food and adjustable door or utility bins from doors.

■

If you are only removing and replacing the doors, see the
“Remove Doors and Hinges” and “Replace Doors and
Hinges” sections.

■

Depending on your model, you may have standard (Style 1) or
contoured (Style 2) doors. If you are also going to reverse the
door swing, follow the instructions for the appropriate door
style.

NOTE: A Reversibility Kit, which includes a new Brand Badge
and hole covers, is available.

■

All graphics referenced in the following instructions are
included later in this section after “Final Steps.”

Remove Doors and Hinges

⁵⁄₁₆

" Hex-head Hinge Screw

1. Unplug refrigerator or disconnect power.
2. Close the refrigerator door and keep both doors closed until

you are ready to lift them free from the cabinet.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.

3. Remove the parts for the top hinge as shown in Top Hinge

graphic. Lift the freezer door free from the cabinet.

4. Remove the parts for the center hinge as shown in the Center

Hinge graphic. Lift the refrigerator door free from the cabinet.

5. Remove base grille from the bottom front of the refrigerator.
6. Remove the parts for the bottom hinge as shown in the

Bottom Hinge graphic.

Reverse Doors (optional)

IMPORTANT: If you want to reverse your doors so that they open
in the opposite direction, follow these steps. If you are not
reversing the doors, see “Replace Doors and Hinges.”

Style 1 - Standard Door Models

Graphics follow these instructions.

Cabinet

1. Remove the three dome caps and the screws from handle

side and move them to opposite side. See Graphic 1-1.

2. Remove cabinet hinge hole plugs from cabinet top and

move them to opposite side hinge holes as shown.
See Graphic 1-2.

Freezer Door

1. Remove the screw cover. See Graphic 2.
2. Remove the freezer handle assembly as shown. Keep all parts

together. See Graphic 2.

3. Remove door hinge hole plug from freezer door. Move to

opposite side hinge hole as shown. See Graphic 3.

4. Remove the brand badge using the plastic tool (provided).

Replace it with the badge provided in the Reversibility Kit
located inside the crisper drawer. For proper placement, see
the Brand Badge Placement template (the last page of this
manual).
NOTES:

■

To avoid scratching the finish, do not use a sharp or
metallic object to pry the brand badge from the door.

■

Rub a small amount of liquid dish soap over any adhesive
residue with your fingers. Rinse the door with warm water
and dry with a soft cloth.

5. Remove door stop. Move to opposite side of refrigerator door

as shown. See Graphic 5.

6. Position freezer handle on opposite side of the freezer door as

shown. See Graphic 2. First, drive the bottom two screws into
handle. Align upper portion of handle and drive top screw into
handle.

7. Tighten all screws. Set aside door until hinges and refrigerator

compartment door are in place.

8. Replace screw cover. See Graphic 2.

■