30
Product Introduction
Moving and Placement
Decline no more
than 45°
•
Do not move the refrigerator with its doors or handles, please move by lifting up the bottom of it.
• In order to avoid appliances' damage or body injury, please remove all the parts and shelves, and seal the
drawers, vegetable compartments, door shelves and doors with stickers, to ensure doors will not open
and no parts collision, friction, falling during transportation.
• Do not grasp the doors or top cover when moving the refrigerator, but can tilt it back (no more than 20°),
use trundles to move for a short distance.
• The refrigerator should be put on a flat and solid floor. The mat must be flat, solid, hard and fire-proof if
the refrigerator needs to be put at a higher place. Please note that the bottom foam cannot be used as a
mat.
•
Kee
p away
fr
om heat and avoid
dir
ect sunlight. Do
no
t place the
fr
eezer in humid or
wate
ry places
to
prevent rust or reduction of insulating effect.
•
Refrigerator will be heated during operation. Please keep 10cm of space from the side to the wall, at
least
10cm from the back to the wall, and
1
0cm from its top.
• Please leave enough space to ensure feasible opening and drawer removal. Dimensions shown are for
reference only.
• If the refrigerator is not stable, adjusting the adjustable feet can fix the problem. The clockwise direction
will increase the height and the counter clockwise direction will decrease the height.
Flat & solid floor
Unstable floor
Beware of falling
Adjustable feet
10CM
10CM
At least 10cm space
Please reserve
at least 10cm
at back.
10CM
1
0CM
Do not
invert, horizontally lay, squeeze or vibrate the refrigerator. When move the refrigerator, do not decline
more
than 45°.
•
