Whirlpool WET4027HW0, Руководство по обслуживанию

Страница: 28 / 82

2-14
n
27” Stacked Laundry Center
DIAGNOSTICS & TROUBLESHOOTING
For Service Technician Use Only
Problem Possible Cause Checks & Tests
Poor Wash
Performance
Please reference Use
& Care Guide
Oversuds. 1. Verify use of HE detergent.
2. Excessive detergent usage.
Load is tangling. 1. Washer not loaded properly.
2. Perform washer calibration on page 2-4.
Incorrect water level. 1. Perform washer calibration on page 2-4.
2. See TEST #2: Valves, page 3-7.
3. See TEST #5: Water Level, page 3-13.
Clothes wet after cycle is complete
(not water saturated, but very
damp)
1. Overloaded washer.
2. Oversuds (see above).
3. Items caught in tub sump.
4. Weak suspension.
5. Shifter not moving into position (see TEST #3a).
6. Cold/Rinse water > 105°F (40°C).
7. See TEST #6: Drain Pump, page 3-14.
Load not rinsed. 1. Check proper water supply.
2. Not using HE detergent.
3. Washer not loaded properly.
4. Shifter not moving into position (see TEST #3a).
5. See TEST #2: Valves, page 3-7.
Not cleaning clothes 1. Washer not loaded properly.
2. Not using HE detergent.
3. Not using correct cycle.
4. Shifter not moving into position (see TEST #3a).
Fabric damage. 1. Washer overloaded.
2. Bleach added incorrectly.
3. Sharp items in tub.
Wrong option or cycle selection. Refer customer to “Use & Care Guide”.
Washer Troubleshooting Guide (continued)