background image

18

LIMITED WARRANTY

Applies in U.S.A. and Canada Only

FAILURE TO MAINTAIN YOUR EQUIPMENT WILL VOID THIS WARRANTY

COVERED EQUIPMENT

The following Whirlpool

®

 and Whirlpool Gold

®

 (G) cooling and heating equipment is covered by the Limited Warranty:

Condensing Units: W2C3, W2C4, W2GC3, W4GC3, W4GC4, W4GC6, W4GC8

Heat Pumps: W2H3, W2H4, W2GH3, W4GH3, W4GH4, W4GH6, W4GH8

Gas Furnaces: WFAT, WFAR, WFCT, WFCC, WGFA, WGFB, WFAU, WGFD, WGFE

Air Handlers: WAHMS, WAHMV

Electric Furnaces: WMB

Evaporator Coils: WEC1P, WEM1P, WEU1P, WEH1P

Package Equipment: W2PG3, W2PH3, W2PC3, W4PG4, W4PH4

FIVE (5) YEAR COVERAGE—RESIDENTIAL APPLICATIONS

The covered equipment and covered component are warranted by Whirlpool

®

 Home Cooling and Heating for a period of five (5) years 

from the date of the original installation, when installed in a residental application (single-family dwelling which includes homes, 
duplexes, apartments and condominiums). If, during this period, a covered component fails because of a manufacturing defect, 
Whirlpool

®

 Home Cooling and Heating will provide a free replacement part to the owner through a licensed service contractor. You must 

pay shipping charges and all other costs of warranty service. Whirlpool

®

 Home Cooling and Heating will not pay labor involved in 

diagnostic calls or in removing, repairing, servicing or replacing parts. Such cost may be covered by a separate warranty provided by 
the installer.

ONE (1) YEAR COVERAGE—NON-RESIDENTIAL APPLICATIONS

The covered equipment and covered component are warranted by Whirlpool

®

 Home Cooling and Heating for a period of one (1) year 

from the date of the original installation, when installed in non-residential applications. If, during this period, a covered component fails 
because of a manufacturing defect, Whirlpool

®

 Home Cooling and Heating will provide a free replacement part to the owner through a 

licensed service contactor. You must pay shipping charges and all other costs of warranty service, Whirlpool

®

 Home Cooling and 

Heating will not pay labor involved in diagnostic calls or in removing, repairing, servicing or replacing parts. Such costs may be covered 
by a separate warranty provided by the installer.

EXTENDED COVERAGE

Your Whirlpool

®

 Home Cooling and Heating limited warranty provides extended coverage on the components outlined below. The 

extended coverage begins with the date of the original unit installation and represents the total warranty period for the specific 
component.

Heat Exchangers:

WFAT, WFAR, WGFA, WGFB, W2PG3—Twenty (20) Years—Residential Applications

WFAT, WFAR, WGFA, WGFB, W2PG3—Ten (10) Years—Non-Residential Applications or Subsequent Owner

Non-Direct Vent Applications:

WFCT, WFCC, WFB—Twenty (20) Years—Residential Applications

WFCT, WFCC, WFB—Ten (10) Years—Non-Residential Applications or Subsequent Owners

Direct Vent Applications:

WFAU, WFCT, WFCC, WGFD, WGFE—Limited Lifetime—Residential Applications

WFAU, WFCT, WFCC, WGFD, WGFE—Twenty (20) Years—Non-Residential Applications or Subsequent Owners

For those models for which the limited lifetime heat exchanger warranty is offered, it will apply only to those Residential Applications

Where the original purchaser of the equipment owns and occupies the residence where the equipment is located at the time of the 
warranty claim. When a warranty claim is made under the limited lifetime heat exchanger warranty for a Residential application and a 
subsequent owner or a non-owner occupies the residence where the equipment is located, then coverage under the limited lifetime 
heat exchanger warranty is limited to twenty (20) years. Lifetime coverage under the limited lifetime heat exchanger warranty is subject 
to proof of purchase and is not transferable. All terms of this warranty must be followed.

Heat Exchanger Availability: If a replacement heat exchanger is no longer available for a unit covered by this warranty, Whirlpool

®

 Home 

Cooling and Heating will allow a credit toward the purchase of an equivalent furnace (at the current suggested distributor’s cost).

Compressors:

W2C3, W2H3, W2C4, W2H4, W2PG3, W2PH3, W2PC3—Five (5) Years

W2GC3, W4GC3, W4GC6, W2GH3, W4GH3, W4GH6—Ten (10) Years

Extended warranty coverage on compressors applies to the original equipment purchaser, subject to proof of purchase, and is not 
transferable. Compressor warranty is five (5) years in all non-residential applications and for subsequent owners in residential 
applications.

NOTE: If the date of original installation cannot be verified, the warranty period will be deemed to begin six (6) months after the 
date of manufacture
.

Содержание W4GH8





















Отзывы: