Whirlpool IEL730C, Техническое образование

Страница: 36 / 66

COMPONENT ACCESS
3-4
n
Vesta Gas and Electric Slide-In Ranges
Removing the Igniter Switches
1. Remove the control panel (see “Removing
the Control Panel section).
2. Remove the rubber protection covers from
all the gas valves.
3. Remove (unsnap) the igniter switches from all
gas valves.
4. On the right side of the burner box, locate and
disconnect the spark igniter’s quick disconnect
connection.
5. Remove the igniter switch assembly (all
switches are serviced as one piece). Figure 10
Removing a cooktop burner
1. Remove the cooktop (see “Removing the Cooktop”
section).
2. Use a ½” open end wrench and remove the gas line from
the burner.
3. Remove the spark igniter from the burner by squeezing
and removing the igniter clip.
4. Remove the mounting screw and remove the burner
Removing a spark igniter
1. Remove the cooktop (see “Removing the Cooktop”
section).
2. Remove the spark igniter from the burner by squeezing
and removing the igniter clip.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
Figure 11
Figure 12
Figure 10