background image

1

Do not store or use gasoline or other 
flammable vapors and liquids in the 
vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

 

•  Do not try to light any appliance.

 

•  Do not touch any electrical switch;  

 

 

do not use any phone in your    

  building.

 

•  Immediately call your gas supplier  

 

 

from a neighbor’s phone. Follow  

  the 

gas 

supplier’s 

instructions.

 

•  If you cannot reach your gas 

 

 

supplier, call the fire department.

Installation and service must be performed 
by a qualified installer, service agency or 
the gas supplier.

WARNING:  If the information in these
instructions is not followed exactly, a fire 
or explosion may result causing property 
damage, personal injury or death.

INSTALLER:
• 

AFFIX THESE INSTRUCTIONS TO OR ADJACENT   
TO THE WATER HEATER.

OWNER:
• RETAIN 

THESE 

INSTRUCTIONS 

AND 

WARRANTY 

FOR FUTURE REFERENCE. RETAIN THE ORIGINAL 
RECEIPT AS PROOF OF PURCHASE.

Table of Contents   ......................................................    2

6510374

W10100870

February 2006

Energy Smart Gas 

Water Heater

with the Flame Lock

Safety System

To obtain technical, warranty, or service assistance during or after 
the installation of this water heater, visit our website at:

http://www.whirlpoolwaterheatersupport.com

or call toll free

1-877-817-6750

When calling for assistance, please have the following 
information ready:

1. Model 

number

2. 

7 digit product number

3. Serial 

number

4. 

Date of installation

5. Place 

of 

purchase

NATURAL GAS MODELS ONLY

Installation

Instructions and

Use & Care Guide

http://waterheatertimer.org/How-to-troubleshoot-gas-water-heater.html

Содержание energysmart Residential Electric Water Heater





























Отзывы: