Whirlpool bsf 9152 ox, Инструкция по безопасности, эксплуатации и установке

Страница: 8 / 33

8
DECLARATION
OF CONFORMITY
This appliance has been
designed for preserving food
and is manufactured in
compliance with Regulation
(CE) No . 1935/2004 .
This appliance has been
designed, manufactured and
marketed in compliance with:
› safety objectives of the “Low
Voltage” Directive 2006/95/CE
(which replaces 73/23/CEE and
subsequent amendments);
› the protection requirements
of Directive “EMC” 2004/108/
EC . Electrical safety of the
appliance can only be
guaranteed if it is correctly
connected to an approved
earthing system .
domestic waste but must be
taken to an appropriate
collection centre for the
recycling of electrical and
electronic equipment .
ENERGY SAVING TIPS
Install the appliance in a dry,
well ventilated room far away
from any heat source (e .g .
radiator, cooker, etc .) and in a
place not exposed directly to
the sun . If required, use an
insulating plate .
To guarantee adequate
ventilation follow installation
instructions . Insufficient
ventilation on back of the
product increases energy
consumption and decreases
cooling efficiency .
The internal temperatures of
the appliance may be affected
by the ambient temperature,
frequency of door opening, as
well as location of the
appliance . Temperature setting
should take into consideration
these factors .
Reduce to a minimum door
opening .
When thawing frozen food,
place them in the refrigerator .
The low temperature of the
frozen products cools the food
in the refrigerator .
Allow warm food and drinks to
cool down before placing in
the appliance .
Positioning of the shelves in
the refrigerator has no impact
on the efficient usage of
energy . Food should be placed
on the shelves in such way to
ensure proper air circulation
(food should not touch each
other and distance between
food and rear wall should be
kept) .
You can increase storage
capacity of frozen food by
removing baskets and, if
present, Stop Frost shelve,
maintaining an equivalent
energy consumption .
High energy class products are
fitted with high efficiency
motors that remain operational
for longer, but have a low
power consumption . Do not
worry if the engine continues
to run for longer periods .