Whirlpool bsf 9152 ox, Инструкция по безопасности, эксплуатации и установке

Страница: 13 / 33

13
EN
FIRST TIME USE
INSTALLATION
HOW TO USE
THE APPLIANCE
After plugging the appliance to the mains, it starts
the operation automatically .
After starting the appliance, wait at least 4-6 hours
before placing food into the appliance .
The appliance is normally factory-set for operation
at the recommended medium temperature .
For details of setting temperature - see the Daily
Reference Guide .
Note : Displayed set points correspond to the
average temperature throughout the whole
refrigerator .
When the appliance is connected to the power
supply, the display lights up and all the icons appear
on the display for approximately 1 second . The
default (factory) values of the fridge compartment
settings light-up .
HOW TO START THE APPLIANCE
INSTALLING SINGLE APPLIANCE
To guarantee adequate ventilation, leave a space on
both sides and above the appliance .
The distance between the rear of the appliance and
the wall behind the appliance should be at least
50mm .
A reduction of this space will increase the Energy
consumption of product .
INSTALLING THE SPACERS
Fit the spacers on the upper and bottom part of
condenser (according the drawing) at the rear of the
appliance .
TEMPERATURE SETTING
50mm
50mm