Whirlpool AMW 590, Инструкция по эксплуатации

Страница: 2 / 20

2
INSTALLATION
PRIOR TO CONNECTING
E
NSURE THAT THE APPLIANCE IS NOT DAMAGED
. Check
that the oven door closes firmly against the
door support. Empty the oven and clean the
interior with a soft, damp cloth.
AFTER CONNECTING
T
HE EARTHING OF THIS APPLIANCE
is compulso-
ry. The manufacturer will accept no re-
sponsibility for injury to persons, ani-
mals or damage to objects arising from
the non-observance of this requirement.
The manufacturers are not liable for any
problems caused by the user’s failure to ob-
serve these instructions.
D
O NOT OPERATE THIS APPLIANCE
if it has a
damaged mains cord or plug, if it is not
working properly, or if it has been dam-
aged or dropped. Do not immerse the
mains cord or plug in water. Keep the
cord away from hot surfaces. Electrical
shock, fi re or other hazards may result.
E
NSURE
the oven cavity is empty before mount-
ing.
C
HECK THAT THE VOLTAGE
on the rating
plate corresponds to the voltage in your
home.
MOUNTING THE APPLIANCE
F
OLLOW THE SUPPLIED
separate mounting in-
structions when installing the appliance.
F
IRST HEAT
. Insulating materials and pro-
tective greases can cause some smell
and fumes the fi rst time the oven is heat-
ed up. Therefore you should heat the
empty oven at 200°c for about an hour
in order to eliminate them. Ensure the
room is well ventilated during this pro-
cedure. Turn kitchen fan on and/or open
the kitchen window.
R
EMOVE ALL STICKERS
from the oven door
and front of the oven with the exception
of the rating plate which shall remain in
place.
R
EMOVE ALL PROTECTIONS
, cardboard & plas-
tic fi lms from the control panel and oth-
er parts of the oven.
R
EMOVE ALL LABELS
from accessories (for
example, underneath the Glass Drip
Pan).
R
EMOVE ALL ACCESSORIES
from the oven and
ensure the oven cavity is empty.