GB7
INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN
The wire shelf and other accessories are provided with a locking mechanism to prevent their accidental removal.
1.
Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. 1).
2.
Angle the wire shelf when it reaches the locking position “B” (Fig. 2).
3.
Return the wire shelf to the horizontal position and push it in fully to “C” (Fig. 3).
4.
To remove the wire shelf proceed in reverse order.
The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The protrusion on the flat surface
enables the accessories to lock in place.
CONTROL PANEL DESCRIPTION
ELECTRONIC PROGRAMMER
1.
FUNCTION SELECTOR KNOB:
On/off and function selector knob
2.
BROWSE KNOB:
for browsing the menu and adjusting pre-set values
NOTE: the two knobs are retractable. Press the knobs in the middle and they pop up.
3.
BUTTON :
to return to the previous screen
4.
BUTTON :
to select and confirm settings
LIST OF FUNCTIONS
Turn the “Functions” knob to any position and the oven switches on: the display shows the functions or the associated
submenus.
The submenus are available and selectable by turning the knob to the functions GRILL, SPECIAL, SETTINGS, BREAD/PIZZA,
AUTOMATIC CLEANING.
NOTE: for the list and description of functions, see the specific table at page 12.
Fig. 1
Fig. 2 Fig. 3
