1 INSTALLATION
ENGLISH
SUMMARY:
•
1 INSTALLATION
•
2 ENVIROMENTAL CONDITIONS
•
3 ACCESSORIES
•
4 ADVISES FOR ENVIRONMENT PRESERVATION
•
5 PERIODICAL MAINTENANCE
•
6 INCONVENIENTS AND REMEDIES
•
7 SEASONAL USE
•
8 SETTING AND CONTROLS
•
9 DOOR OPENING INVERSION
•
10 TECHNICAL DATA
Thank you for having chosen one of our products. You certainly have made a good investment and we are sure
that our appliance will prove this to you. Our appliances have been carefully designed to give the best possible
performances under the best safe and economic conditions. Many strict controls have been carried out during
production process.
In order to avoid risks to the user, damages to the cabinets or jeopardy of the performance, follow carefully the instructions
here below.
Our company declines any responsibility in case the original performance of the device may be altered by any kind of
modification (addition or removal of either electrical or mechanical parts) or by non-compliance of the instructions of this
manual.
After taking out the packing, clean carefully the whole cabinet; in order to do that, see 5. PERIODICAL MAINTENANCE, BESIDES:
Do not install the unit in open spaces and do not expose it to the rain: the external environmental conditions for the regular working of the unit are
specified on TECHNICAL DATA.
1.
The cabinet has to be installed on a plane surface and it must be perfectly levelled: to obtain this the adjustable feet.
2.
Place the cabinet in a well ventilated place far away from heating sources (radiators, cookers) and not directly exposed to the sun. To light up
the cabinet’s it is advisable to use fluorescent lamps.
3.
The cabinet must be leaned against the wall but before leaning it verify if inside the instruction kit there are some spacers to put on its back. In
case it must be shifted, first take the socket off the current-tap. Whenever, if due to any installation reasons, you cannot lean the unit to the wall
,you have to assemble the motor room protection grill to the lead screws placed on the back lower sides of the unit (you can ask for the needed
material to the producer).
4.
The cabinet can be equipped with a lock (optional). In that case keep the keys out of the reach of children.
5.
Inspect the cabinet to find out that no damage has been caused during the transport.
WARNING:
NEVER WET ANY CABINET PART WHERE ELECTRICAL COMPONENTS ARE PRESENT.
NEVER FORCE ANY CABINET PART WHERE REFRIGERATING CYCLE COMPONENTS ARE PRESENT.
THE CABINET IS NOT SUITABLE FOR WORKING IN DANGEROUS PLACES WITH RISK OF FIRE, EXPLOSIONS
AND/OR RADIATIONS.
PUTTING INTO OPERATION
Before putting the plug in the socket let it stay still for about an hour. In case the transport has been done with the unit laid down, it is advisable to
wait for 24 hours.
Check that the actual network voltage corresponds to the one stated on the technical data plate . Do not lay anything on the cabinet (plants, boxes,
etc..)and leave a free space of minimum 50 cm. over the cabinet.
